Model: YSV-1A-High efficiency PCB Separation / pcb separator machine with transport belt
1.It is suitable to cut PCB
2. Printed Circuit Board
3. LED Aluminum plate/LED strip/LED light bar
4. Fiberglass panel/sheet
1.Available V-cut thickness: from 0.2mm to 2.0mm
2. Available PCB thickness: from 0.2mm to 3.2 mm
3. Maximum board length: 1300mm
Available PCB length
Our Advantages
1. Manufacturer.Good quality with factory / low price
2. Good after-sales service
3. Easy and safe operation
Features:
1. Upper blade can be adjuable between 0 and 2mm to meet different thickness of PCB and V-cut.
2. Operation platform can be adjustable higher and lower between 0 and 50mm.
3.Machine can cut boards as long as 1300mm
4.Available board thickness: 0-3.2mm . V-groove thickness:0-2mm
5.Pre-set the cutting start and end point to well control the cutting length.
6.The blades are sharp and indurable. And they can be sharpened between 7 and 10 times.
7. Minimize the shearing stress to avoid micro-cracks of the solder joints.
8. Coutrolled by microcomputer program, it can cut board accurately with no error.
9. Adjustable blade moving speed : 300mm/s or 500mm/s. As per customers' need, certain speed can be set.
Specifications:
1.For V-cut PCB, Aluminum PCB
2.PCB thickness:0.2-3.2mm
3.PCB length:0-1300mm
4.Fast speed and lowest press
5.Blade moving
Model: YSV-1A-High efficiency PCB Separation / pcb separator machine with transport belt
1.It is suitable to cut PCB
2. Printed Circuit Board
3. LED Aluminum plate/LED strip/LED light bar
4. Fiberglass panel/sheet
1.Available V-cut thickness: from 0.2mm to 2.0mm
2. Available PCB thickness: from 0.2mm to 3.2 mm
3. Maximum board length: 1300mm
Available PCB length
Our Advantages
1. Manufacturer.Good quality with factory / low price
2. Good after-sales service
3. Easy and safe operation
Features:
1. Upper blade can be adjuable between 0 and 2mm to meet different thickness of PCB and V-cut.
2. Operation platform can be adjustable higher and lower between 0 and 50mm.
3.Machine can cut boards as long as 1300mm
4.Available board thickness: 0-3.2mm . V-groove thickness:0-2mm
5.Pre-set the cutting start and end point to well control the cutting length.
6.The blades are sharp and indurable. And they can be sharpened between 7 and 10 times.
7. Minimize the shearing stress to avoid micro-cracks of the solder joints.
8. Coutrolled by microcomputer program, it can cut board accurately with no error.
9. Adjustable blade moving speed : 300mm/s or 500mm/s. As per customers' need, certain speed can be set.
Specifications:
1.For V-cut PCB, Aluminum PCB
2.PCB thickness:0.2-3.2mm
3.PCB length:0-1300mm
4.Fast speed and lowest press
5.Blade moving
