Ø Some parts of the equipment, filter housing, pump body, valves, screws and necessary tools are made of stainless steel.
    Ø Pipe installation is flexible with welding, flange and other connection methods to facilitate machine operation, maintenance and transportation.
    Ø Pipe connection is connected by PPH pipe to prevent water leakage; the filter is completely fixed, and the waterproof pump connector is damaged.

     Ø The whole equipment adopts SUS304 stainless steel plate, and the bottom of the groove has a certain angle of inclination for easy cleaning and discharge.

     Ø The cleaning tank is equipped with liquid level control to protect the pump and heating tube.

     Ø The cleaning solution is automatically discharged and has a circulation filtration system.

     Ø Rinsing tank The rinsing water is automatically added and discharged, and is equipped with automatic reflux circulation filtration.

     Ø The entire system is automatically controlled by the PLC programming circuit.

     Ø Set parameters related to cleaning, rinsing and drying on the touch panel of the control panel.

    Ø The functions of heating and filtering of the cleaning tank and the rinsing tank are automatically controlled and operated, and the power can be cut off urgently under abnormal conditions.

    Ø With independent circuit control system; the main power air switch with leakage protection. The circuit is divided into functions, strong and weak, to facilitate maintenance.

  

  Ø The equipment has a good grounding device.

Ø Cleaning method using spray + ultrasonic cleaning

Ø Cleaning time: 5-10Min (working time can be adjusted to 100min)

Ø Slot size: about 700 × 150 × 400 (L × W × H) mm

Ø The bottom of the liquid storage tank is inclined and automatically discharged (closed-loop cleaning).

Ø With cleaning fluid circulation system, filter liquid while cleaning, filtration accuracy 10μm

Ø Pump power: 1.1KW

Ø With cleaning fluid heating system

Ø Liquid heating power: 6 KW


Ø Rinsing time: 2-5Min (working time can be adjusted to 100min)

Ø Spray chamber size: about 900 × 350 × 800 (L × W × H) mm


Ø Drying time: 5-10Min (working time can be adjusted to 100min)

Ø Fan power: 5.5KW

Ø Heating power: 6 KW