Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  英文版    中文版
  • 1
  • 2
Automatic PCBA Board Separator for FR4 Multilayer PCB,PCB Fabrication
Detailed Product Description
  • Punching force:: 3T 8T 10T
  • Size:: 820 x 740 x 1750mm

FPC Depaneling Machine-YSPE-YUSH Electronic Technology Co.,Ltd.png

Parameters of Punch Plate Separator--YSPE

Characteristic:

1. Punching die.

2. the equipment is compact, the fuselage is strong, and the cylinder is 125160200 cylinder diameter.

3. The equipment runs smoothly with low vibration and noise.

4. the Chinese touch-screen display, the panel is clear, the Chinese alarm function shows that the abnormal alarm is clear at a glance.

5. The equipment is universal. Various moulds can be replaced, and the change of moulds is convenient and fast.

Equipment safety:

1. Double switch two hands action start.  

2. Equipments are equipped with the slideway of lower die in and out, and the lower die is automatically in and out, so the product is convenient and safe to take and place.  

3. Set up emergency shutdown switch and shut down in time when problems are found.  

4. Set up the safety door to avoid the wrong hand entry when installing and debugging the mould. (No safety door does not work during normal operation)

5. Set up a safety door shooting device, and place a wrong plate on the die. The shooting device can sense errors, and the die can not enter.  

6. Safety air pressure setting function, alarm for exceeding limit. Automatic counting, over-limit shutdown.

7. Minimizing the internal stress and avoiding tin cracking

8. Punching semi-finished PCB. FPC efficiency is very high, the world's top 500 designated product suppliers.  

Specifications:

(1) Size: 820 x 740 x 1750mm

(2) Punching force: 3T 8T 10T

(3) The weight of the machine is 580 kg.

(4) Placement area 330 x 220 mm

(5) Working itinerary: > 60mm

(6) Working noise:<60dB

(7) Dry gas source with working pressure of 0.50-0.70 Mpa

(8) Working accuracy: +0.05 mm

(9) Cylinder return opening force: 1.5T 4T 5T

(10) Voltage 220VAC

(11) Travel speed: 8-15 seconds adjustable (excluding the time for picking up parts from the plate)

Product Categories
                            Automatic PCBA Board Separator for FR4 Multilayer PCB,PCB Fabrication
                             
                            Detailed Product Description
                            • Punching force:: 3T 8T 10T
                            • Size:: 820 x 740 x 1750mm

                            FPC Depaneling Machine-YSPE-YUSH Electronic Technology Co.,Ltd.png

                            Parameters of Punch Plate Separator--YSPE

                            Characteristic:

                            1. Punching die.

                            2. the equipment is compact, the fuselage is strong, and the cylinder is 125160200 cylinder diameter.

                            3. The equipment runs smoothly with low vibration and noise.

                            4. the Chinese touch-screen display, the panel is clear, the Chinese alarm function shows that the abnormal alarm is clear at a glance.

                            5. The equipment is universal. Various moulds can be replaced, and the change of moulds is convenient and fast.

                            Equipment safety:

                            1. Double switch two hands action start.  

                            2. Equipments are equipped with the slideway of lower die in and out, and the lower die is automatically in and out, so the product is convenient and safe to take and place.  

                            3. Set up emergency shutdown switch and shut down in time when problems are found.  

                            4. Set up the safety door to avoid the wrong hand entry when installing and debugging the mould. (No safety door does not work during normal operation)

                            5. Set up a safety door shooting device, and place a wrong plate on the die. The shooting device can sense errors, and the die can not enter.  

                            6. Safety air pressure setting function, alarm for exceeding limit. Automatic counting, over-limit shutdown.

                            7. Minimizing the internal stress and avoiding tin cracking

                            8. Punching semi-finished PCB. FPC efficiency is very high, the world's top 500 designated product suppliers.  

                            Specifications:

                            (1) Size: 820 x 740 x 1750mm

                            (2) Punching force: 3T 8T 10T

                            (3) The weight of the machine is 580 kg.

                            (4) Placement area 330 x 220 mm

                            (5) Working itinerary: > 60mm

                            (6) Working noise:<60dB

                            (7) Dry gas source with working pressure of 0.50-0.70 Mpa

                            (8) Working accuracy: +0.05 mm

                            (9) Cylinder return opening force: 1.5T 4T 5T

                            (10) Voltage 220VAC

                            (11) Travel speed: 8-15 seconds adjustable (excluding the time for picking up parts from the plate)

                            Online Message
                            Welcome message, we will reply within 24 hours!
                            *Subject:
                            *Your E-Mail:
                            (Please make sure your E-mail address is correct.
                            Else, the receiver cannot reply you afterwards. )

                            Content:
                            *Country/Region:
                            Your Company:
                            Your Name:
                            Tel:
                            Fax:
                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016-2023
                            CONTACT US
                            Contacts:Eva Liu +86 13416743702
                            Tel:+86-512-62751429
                            Skype:evaliuhuan
                            Email:sales@yushunli.com evaliu@hk-yush.com
                            Company Address:Address: Building H, GuoRui Pioneering
                            Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                            Suzhou,Jiangsu,China.
                            Postcode:215331
                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016-2023