pcba depaneling machine -YSV-1M
size: 787x400x436 mm
The separate size: 480mm
Minimize Speed: Manual
Minimize thickness: 0.6-3.5mm
Machine Weight: 30Kg
Manual Circular & Linear Blade Depanelizer
1.Round knife, manually cutting against lower linear knife, for reduced stress
2.Separate pre-scored PCB assembly without stress on either PCB or component
3.One touch programming of cut length with digital display
4.Separating speed is adjusted by a rotary knob
5.Handle Intermittent scoring or cut-outs
6.Board with projected component can be cut precisely
7.Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable
8.Optional PCB conveyor belt to remove finished board
9.Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out
pcba depaneling machine YSV-1M
FEATURES:
To avoid welding spot cracking and deceasing physical strength during cutting process.
PCB remain stable when V-CUTTING,can make sure personal safety when moving back and forth.
Introduced Siemens PLC controller,easy to operate and high relibility.
Cutting principle is based on data convension.
Apply to all kinds of V-CUT PCB board.
pcba depaneling machine -YSV-1M
size: 787x400x436 mm
The separate size: 480mm
Minimize Speed: Manual
Minimize thickness: 0.6-3.5mm
Machine Weight: 30Kg
Manual Circular & Linear Blade Depanelizer
1.Round knife, manually cutting against lower linear knife, for reduced stress
2.Separate pre-scored PCB assembly without stress on either PCB or component
3.One touch programming of cut length with digital display
4.Separating speed is adjusted by a rotary knob
5.Handle Intermittent scoring or cut-outs
6.Board with projected component can be cut precisely
7.Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable
8.Optional PCB conveyor belt to remove finished board
9.Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out
pcba depaneling machine YSV-1M
FEATURES:
To avoid welding spot cracking and deceasing physical strength during cutting process.
PCB remain stable when V-CUTTING,can make sure personal safety when moving back and forth.
Introduced Siemens PLC controller,easy to operate and high relibility.
Cutting principle is based on data convension.
Apply to all kinds of V-CUT PCB board.
