UX series oven is based on customer demand and adopts modular, digital and humanized design. With superiority in function, performance, stability, reliability, security, maintainability,operability and humanization,it doesn't only reduce the operating cost, but also provides qualified products for quality,quantity and production with strong guarantee.It can be described as the "peak" work in the fifield of Wave soldering products, and the preferred "brand products" for customer investment.
Integrated spray fluxer unit(selective spray device is optional)
Drawer type and modular structure preheating zones
Cast iron soldering pot with special anti-corrosion coating
Manual width adjustment with digital display
Solder pot electric/manual lifting in and out
1.The transportation system adopts section floating structure, effectively prevent guide rail deformation, new titanium alloy double hook finger,non-stick tin, direct linkage buffering, aluminum guide rail, more smooth.
2.Spray unit integrated module design, through the fast connector connected with the machine; adopts new precision nozzle, which can achieve
high efficiency, uniform atomization coating effect and meet the process requirements of water flux.
3.The preheating system adopts micro-hot air + infrared heating tube, three-section preheating temperature zone, drawer type modular design,flexible selection of mixed preheating mode, uniform and stable temperature.
4.Forced air cooling system (Water chiller is optional).
5.The solder pot system adopts special material for pot, and anti-corrosion treatment for inner surface. (New nozzle fixed mode, easy to remove and assembly; the solder pot temperature control precision is ±2℃; solder pot electric/manual lifting in and out, easy to operate.
6.Windows 7 operating system, Chinese/English intelligent software, with parameter setting, saving, reuse, remote monitoring functions. Process
profile/data automatic storage function, temperature profile test function.
01 Buffer system
02 Flux supply system
03 Exhaust fan
04 Flus spray system
05 LCD
06 Pre-heater
07 Solder pot lifting unit
08 Dual wave solder pot
09 Cooling system
10 Angle adjustment controller
11 Finger cleaning system
12 Conveyor system
| Model No. | YSL-350UX | YSL-450UX | YSL-610UX |
| Dimension: L*W*H(mm) | 4350*1480*1750 | 4350*1580*1750 | 4350*1740*1750 |
| Weight | Approx.1800kg | Approx.1950kg | Approx.2150k |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Start up Power | 32KW | 32KW | 45KW |
| Normal Running Power | Approx.8KW | Approx.8.5KW | Approx.11KW |
| Control System | PC+PLC | ||
| Spraying movement | Step motor | ||
| Spraying Pressure | 0.2Mpa~0.4Mpa | ||
| Flux Flow Control | Option | ||
| Auto Flux Filling | Standard | ||
| Exhausting | Top exhaust+Side exhaust | ||
| Exhausting Pipe Diameter(mm) | Φ250 | ||
| Exhaust Capacity | 30m³/min | ||
| Preheating Mode | Hot air convection/IR | ||
| Temperature Control Mode | PID | ||
| Preheating Zone Quantity | 3 | ||
| Preheating Zone Length(mm) | 1800 | ||
| Preheating Temperature Range | Room temperature~200℃ | ||
| Warm-up Time(min) | Approx.12min(setting: 150℃) | ||
| Preheating Blower Motor | 250W 3PH 220 VAC | ||
| Width(mm) | 50~350 | 50~450 | 50~610 |
| PCB Conveying Direction | L→R( Option:R→L) | ||
| Conveying Speed(mm/min) | 500~1800 | ||
| Conveying Height(mm) | 750±20 | ||
| Available Component Height(mm) | Top120 Option:240 Bottom15 | ||
| Conveying Speed Control Mode | Closed loop stepless speed regulation by inverter | ||
| Finger | Spring Pressing Finger；D-40 Type Finger；Double-hook Finger；Heavy type double hook finger(Options) | Heavy type double hook finge Option:Special jig for fixture | |
| Conveying Angle | 4~7° | ||
| Solder Pot Type | Mechanical | ||
| Solder Pot Material | Casting Iron | ||
| Wave Height Adjustment | Inverter: Digital Control by PC | ||
| Cooling type | Air Cooling Option: Water cooling | ||
| Solder Pot Heating Power | 13.5KW | 18KW | |
| Max Solder Pot Temperature | 300℃ | ||
| Solder Pot Capacity | Approx.480kg | Approx.550kg | Approx.640kg |
| Wave Driving Power | 180W*2 3PH 220 VAC | ||
| Solder Pot Warm-up Time | Approx.150min(setting: 250℃) | ||
| Temperature Control Mode | PID | ||
| Finger Cleaning System | Brush | ||
UX series oven is based on customer demand and adopts modular, digital and humanized design. With superiority in function, performance, stability, reliability, security, maintainability,operability and humanization,it doesn't only reduce the operating cost, but also provides qualified products for quality,quantity and production with strong guarantee.It can be described as the "peak" work in the fifield of Wave soldering products, and the preferred "brand products" for customer investment.
Integrated spray fluxer unit(selective spray device is optional)
Drawer type and modular structure preheating zones
Cast iron soldering pot with special anti-corrosion coating
Manual width adjustment with digital display
Solder pot electric/manual lifting in and out
1.The transportation system adopts section floating structure, effectively prevent guide rail deformation, new titanium alloy double hook finger,non-stick tin, direct linkage buffering, aluminum guide rail, more smooth.
2.Spray unit integrated module design, through the fast connector connected with the machine; adopts new precision nozzle, which can achieve
high efficiency, uniform atomization coating effect and meet the process requirements of water flux.
3.The preheating system adopts micro-hot air + infrared heating tube, three-section preheating temperature zone, drawer type modular design,flexible selection of mixed preheating mode, uniform and stable temperature.
4.Forced air cooling system (Water chiller is optional).
5.The solder pot system adopts special material for pot, and anti-corrosion treatment for inner surface. (New nozzle fixed mode, easy to remove and assembly; the solder pot temperature control precision is ±2℃; solder pot electric/manual lifting in and out, easy to operate.
6.Windows 7 operating system, Chinese/English intelligent software, with parameter setting, saving, reuse, remote monitoring functions. Process
profile/data automatic storage function, temperature profile test function.
01 Buffer system
02 Flux supply system
03 Exhaust fan
04 Flus spray system
05 LCD
06 Pre-heater
07 Solder pot lifting unit
08 Dual wave solder pot
09 Cooling system
10 Angle adjustment controller
11 Finger cleaning system
12 Conveyor system
| Model No. | YSL-350UX | YSL-450UX | YSL-610UX |
| Dimension: L*W*H(mm) | 4350*1480*1750 | 4350*1580*1750 | 4350*1740*1750 |
| Weight | Approx.1800kg | Approx.1950kg | Approx.2150k |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Start up Power | 32KW | 32KW | 45KW |
| Normal Running Power | Approx.8KW | Approx.8.5KW | Approx.11KW |
| Control System | PC+PLC | ||
| Spraying movement | Step motor | ||
| Spraying Pressure | 0.2Mpa~0.4Mpa | ||
| Flux Flow Control | Option | ||
| Auto Flux Filling | Standard | ||
| Exhausting | Top exhaust+Side exhaust | ||
| Exhausting Pipe Diameter(mm) | Φ250 | ||
| Exhaust Capacity | 30m³/min | ||
| Preheating Mode | Hot air convection/IR | ||
| Temperature Control Mode | PID | ||
| Preheating Zone Quantity | 3 | ||
| Preheating Zone Length(mm) | 1800 | ||
| Preheating Temperature Range | Room temperature~200℃ | ||
| Warm-up Time(min) | Approx.12min(setting: 150℃) | ||
| Preheating Blower Motor | 250W 3PH 220 VAC | ||
| Width(mm) | 50~350 | 50~450 | 50~610 |
| PCB Conveying Direction | L→R( Option:R→L) | ||
| Conveying Speed(mm/min) | 500~1800 | ||
| Conveying Height(mm) | 750±20 | ||
| Available Component Height(mm) | Top120 Option:240 Bottom15 | ||
| Conveying Speed Control Mode | Closed loop stepless speed regulation by inverter | ||
| Finger | Spring Pressing Finger；D-40 Type Finger；Double-hook Finger；Heavy type double hook finger(Options) | Heavy type double hook finge Option:Special jig for fixture | |
| Conveying Angle | 4~7° | ||
| Solder Pot Type | Mechanical | ||
| Solder Pot Material | Casting Iron | ||
| Wave Height Adjustment | Inverter: Digital Control by PC | ||
| Cooling type | Air Cooling Option: Water cooling | ||
| Solder Pot Heating Power | 13.5KW | 18KW | |
| Max Solder Pot Temperature | 300℃ | ||
| Solder Pot Capacity | Approx.480kg | Approx.550kg | Approx.640kg |
| Wave Driving Power | 180W*2 3PH 220 VAC | ||
| Solder Pot Warm-up Time | Approx.150min(setting: 250℃) | ||
| Temperature Control Mode | PID | ||
| Finger Cleaning System | Brush | ||
