Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  英文版    中文版
    Full Automatic solder paste Printer YSL-T3 Plus
    Detailed Product Description

    Features

    1. Auto balance the squeegee pressure which is adjustable

    2.Intelligent 2D detection

    3.Dry and wet cleaning.Option:vacuum cleaning

    4.Option: for thin board printing

    5.Advanced mark point recognition technology and stable system capability

    6.The first online calibration technology in China

     

    Foll Automatic Screen Printer YSL-T3 Plus 0

     

    Overall diagram

    1.Rack module

    2.Lifting module

    3.Platform alignment module

    4.Housing module

    5.Image capture module

    6.Stencil frame positioning module

    7.Squeegee module

    8.Display module

    9.Cleaning module

    10.Conveyor module

    11.Air and power input

     

    Foll Automatic Screen Printer YSL-T3 Plus 1

     

    Technical parameters

     

     

    ParameterYSL-T3 Plus/YSL-T3 BTB/YSL-T3 Plus BTB
    Basic ParametersScreen Frame Size(mm)520(×)×420(Y)-737(×)×737(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)50(×)×50(Y)mm
    Max PCB(mm)400(X)×310(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height10mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
    ClampSide clamp(Standard),please read the option table
    Edge distancePCB process edge ≥2.5mm
    Conveyor speed0~1500mm/s,increment 1mm
    Conveyor beltU type sync belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Flow directionL-R,R-L,L-L,R-R depends on customer
    Print SystemPrint speed5-200mm/s adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detectionStandard
    AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
    Positional accuracy±0.01mm
    Printing accuracy±0.025mm
    TimeCycle time<10s(ex print,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 900Kg
    Machine dimensions1140(L)×1380(W)×1530(H)mm(standard);1675(L)mm(Feed feeding module);1675(L)mm(Add connection module),2210(L)mm(Add material and connect module)
    OptionPneumatic top clampFor PCB(thickness≤1mm)
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin addedAuto tin added
    Auto loading and unloadingAuto loading and unloading
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frameAutomatic positioning of screen frame
    PCB board thickness movement adjustment functionPCB board thickness is automatically adjusted
    Squeegee pressure feedback functionReal-time feedback of scraper pressure
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring systemThe rest of solder paste on the stencil monitoring system
    SPI close loopSPI close loop
    UPS power off protectionUPS 15min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc


    Product Categories
                      Full Automatic solder paste Printer YSL-T3 Plus
                      Full Automatic solder paste Printer YSL-T3 Plus
                      Full Automatic solder paste Printer YSL-T3 Plus
                       
                      Detailed Product Description

                      Features

                      1. Auto balance the squeegee pressure which is adjustable

                      2.Intelligent 2D detection

                      3.Dry and wet cleaning.Option:vacuum cleaning

                      4.Option: for thin board printing

                      5.Advanced mark point recognition technology and stable system capability

                      6.The first online calibration technology in China

                       

                      Foll Automatic Screen Printer YSL-T3 Plus 0

                       

                      Overall diagram

                      1.Rack module

                      2.Lifting module

                      3.Platform alignment module

                      4.Housing module

                      5.Image capture module

                      6.Stencil frame positioning module

                      7.Squeegee module

                      8.Display module

                      9.Cleaning module

                      10.Conveyor module

                      11.Air and power input

                       

                      Foll Automatic Screen Printer YSL-T3 Plus 1

                       

                      Technical parameters

                       

                       

                      ParameterYSL-T3 Plus/YSL-T3 BTB/YSL-T3 Plus BTB
                      Basic ParametersScreen Frame Size(mm)520(×)×420(Y)-737(×)×737(Y)
                      Thickness∶ 20-40mm
                      Min PCB(mm)50(×)×50(Y)mm
                      Max PCB(mm)400(X)×310(Y)
                      Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                      Curve<1%(Diagonal measurement)
                      PCB backside Part Height10mm
                      Conveyor height900±40mm
                      SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
                      ClampSide clamp(Standard),please read the option table
                      Edge distancePCB process edge ≥2.5mm
                      Conveyor speed0~1500mm/s,increment 1mm
                      Conveyor beltU type sync belt
                      Stopper methodAir cylinder
                      Stopper positionSet the PCB stopper position according to the size of board
                      Flow directionL-R,R-L,L-L,R-R depends on customer
                      Print SystemPrint speed5-200mm/s adjustable
                      Print headStep motor drive scraper lifting
                      ScraperSteel scraper,rubber scraper(option)
                      Scraper angle60°
                      Scraper pressure0~20kg
                      View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                      Alignment position methodMark Automatic aligning
                      CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                      Acquire image methodUpper/under double photo
                      Camera lightCoaxial light,Ring light four kinds light can adjustable
                      View range9mm*7mm
                      Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                      Mark shapeCir,Rec,or rhombus etc
                      Mark positionPCB dedicated mark or PCB pad
                      2D detectionStandard
                      AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
                      Positional accuracy±0.01mm
                      Printing accuracy±0.025mm
                      TimeCycle time<10s(ex print,cleaning time)
                      Convert line time<5min
                      Programming time<10min
                      Control SystemComputer configurationIndustrial PC,Windows official system
                      System languageChinese /English
                      Pre and next machine connectionSMEMA
                      User authorizationUser PW and Senior PW set
                      Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
                      Liquid level detectionLiquid level auto alarm detection
                      Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                      Total powerAbout 3kw
                      Main air supply4.5~6kgf/cm2
                      Machine weightAbout 900Kg
                      Machine dimensions1140(L)×1380(W)×1530(H)mm(standard);1675(L)mm(Feed feeding module);1675(L)mm(Add connection module),2210(L)mm(Add material and connect module)
                      OptionPneumatic top clampFor PCB(thickness≤1mm)
                      Top clamp + side clampFor PCB(thickness≤1mm)
                      Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                      Auto tin addedAuto tin added
                      Auto loading and unloadingAuto loading and unloading
                      Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                      Automatic positioning of screen frameAutomatic positioning of screen frame
                      PCB board thickness movement adjustment functionPCB board thickness is automatically adjusted
                      Squeegee pressure feedback functionReal-time feedback of scraper pressure
                      Air conditionCustomer can buy by themselves
                      The rest of solder paste on the stencil monitoring systemThe rest of solder paste on the stencil monitoring system
                      SPI close loopSPI close loop
                      UPS power off protectionUPS 15min power off protection
                      Industry 4.0Bar code trace function,Production analysis,etc


                      Online Message
                      Welcome message, we will reply within 24 hours!
                      *Subject:
                      *Your E-Mail:
                      (Please make sure your E-mail address is correct.
                      Else, the receiver cannot reply you afterwards. )

                      Content:
                      *Country/Region:
                      Your Company:
                      Your Name:
                      Tel:
                      Fax:
                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                      CONTACT US
                      Contacts:Eva Liu +86 13416743702
                      Tel:+86-512-62751429
                      Skype:evaliuhuan
                      Email:sales@yushunli.com evaliu@hk-yush.com
                      Company Address:Address: Building H, GuoRui Pioneering
                      Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                      Suzhou,Jiangsu,China.
                      Postcode:215331
                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016