Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  英文版    中文版
    Full Automatic solder paste Printer YSL-510H
    Detailed Product Description

    Features

    1.Perfect solution for large size product printing

    2.Simple calibration and maintenance

    3.Stable printing quality

    4.Independent developed image processing software

     

    Full Automatic Screen Printer YSL-510H 0

     

    Overall diagram

    1.Machine housing module

    2.CCD image capture module

    3.Stencil lifting module of Z-axis

    4.Squeegee printing module

    5.Cleaning module

    6.Platform fine adjustment module

    7.Rail and conveyor module

    8.Three color warning lamp

    9.Display and input device

     

    Full Automatic Screen Printer YSL-510H 1

     

    Technical parameters

     

    ParameterYSL-120
    Basic ParametersScreen Frame Size(mm)650(×)×5500(Y)-737(×)×737(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)50(×)×50(Y)mm
    Max PCB(mm)510(X)×510(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height18mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber
    ClampSide clamp and top clamp
    Edge distancePCB process edge ≥2.5mm 
    Conveyor speed0~1500mm/sec,increment 1mm
    Conveyor beltU type belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Set by softwareSoftware Settings
    Print SystemPrint speed5-200mm/s adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detection/
    AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±2°
    Positional accuracy±0.01mm
    Printing accuracy±0.015mm
    TimeCycle time<7.5 exprint,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 1300Kg
    Machine dimensions1350(L)×1625(W)×1535(H)mm
    OptionPneumatic top clampStandard
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin added/
    Auto loading and unloading/
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frameStandard
    PCB board thickness movement adjustment function/
    Squeegee pressure feedback function/
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring system/
    SPI close loopSPI close loop
    UPS power off protectionUPS 15 min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc

     

    Precision/Stable/Smart

     

    1The first domestic online calibration technology

    2.New squeegee pressure setting software

    3.Automatic calibration function-for rail rod wear automatic compensation

    4.Intelligent 2D examination

    5.New squeegee

    6.Each equipment has passed the CPK test,and the test report(PDF file) is available

    7.New alcohol cleaning structure

     

    Full Automatic Screen Printer YSL-510H 2                                         Full Automatic Screen Printer YSL-510H 3

     

    Precise Device of Platform Adjustment         Intelligent 2D examination

    (X-Y-Z Adjust the system)

     

                       Full Automatic Screen Printer YSL-510H 4                                   Full Automatic Screen Printer YSL-510H 5     Full Automatic Screen Printer YSL-510H 6

     

    Mark Point Identification Technology               Stable Printing Quality

     

    Full Automatic Screen Printer YSL-510H 7      Full Automatic Screen Printer YSL-510H 8 Simple calibration and maintenance

     

    Full Automatic Screen Printer YSL-510H 9

     

    Precision Guarantee


    Product Categories
                      Full Automatic solder paste Printer YSL-510H
                      Full Automatic solder paste Printer YSL-510H
                      Full Automatic solder paste Printer YSL-510H
                       
                      Detailed Product Description

                      Features

                      1.Perfect solution for large size product printing

                      2.Simple calibration and maintenance

                      3.Stable printing quality

                      4.Independent developed image processing software

                       

                      Full Automatic Screen Printer YSL-510H 0

                       

                      Overall diagram

                      1.Machine housing module

                      2.CCD image capture module

                      3.Stencil lifting module of Z-axis

                      4.Squeegee printing module

                      5.Cleaning module

                      6.Platform fine adjustment module

                      7.Rail and conveyor module

                      8.Three color warning lamp

                      9.Display and input device

                       

                      Full Automatic Screen Printer YSL-510H 1

                       

                      Technical parameters

                       

                      ParameterYSL-120
                      Basic ParametersScreen Frame Size(mm)650(×)×5500(Y)-737(×)×737(Y)
                      Thickness∶ 20-40mm
                      Min PCB(mm)50(×)×50(Y)mm
                      Max PCB(mm)510(X)×510(Y)
                      Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                      Curve<1%(Diagonal measurement)
                      PCB backside Part Height18mm
                      Conveyor height900±40mm
                      SupportMagnetic support,Magnetic piece,Vacuum chamber
                      ClampSide clamp and top clamp
                      Edge distancePCB process edge ≥2.5mm 
                      Conveyor speed0~1500mm/sec,increment 1mm
                      Conveyor beltU type belt
                      Stopper methodAir cylinder
                      Stopper positionSet the PCB stopper position according to the size of board
                      Set by softwareSoftware Settings
                      Print SystemPrint speed5-200mm/s adjustable
                      Print headStep motor drive scraper lifting
                      ScraperSteel scraper,rubber scraper(option)
                      Scraper angle60°
                      Scraper pressure0~20kg
                      View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                      Alignment position methodMark Automatic aligning
                      CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                      Acquire image methodUpper/under double photo
                      Camera lightCoaxial light,Ring light four kinds light can adjustable
                      View range9mm*7mm
                      Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                      Mark shapeCir,Rec,or rhombus etc
                      Mark positionPCB dedicated mark or PCB pad
                      2D detection/
                      AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±2°
                      Positional accuracy±0.01mm
                      Printing accuracy±0.015mm
                      TimeCycle time<7.5 exprint,cleaning time)
                      Convert line time<5min
                      Programming time<10min
                      Control SystemComputer configurationIndustrial PC,Windows official system
                      System languageChinese /English
                      Pre and next machine connectionSMEMA
                      User authorizationUser PW and Senior PW set
                      Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
                      Liquid level detectionLiquid level auto alarm detection
                      Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                      Total powerAbout 3kw
                      Main air supply4.5~6kgf/cm2
                      Machine weightAbout 1300Kg
                      Machine dimensions1350(L)×1625(W)×1535(H)mm
                      OptionPneumatic top clampStandard
                      Top clamp + side clampFor PCB(thickness≤1mm)
                      Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                      Auto tin added/
                      Auto loading and unloading/
                      Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                      Automatic positioning of screen frameStandard
                      PCB board thickness movement adjustment function/
                      Squeegee pressure feedback function/
                      Air conditionCustomer can buy by themselves
                      The rest of solder paste on the stencil monitoring system/
                      SPI close loopSPI close loop
                      UPS power off protectionUPS 15 min power off protection
                      Industry 4.0Bar code trace function,Production analysis,etc

                       

                      Precision/Stable/Smart

                       

                      1The first domestic online calibration technology

                      2.New squeegee pressure setting software

                      3.Automatic calibration function-for rail rod wear automatic compensation

                      4.Intelligent 2D examination

                      5.New squeegee

                      6.Each equipment has passed the CPK test,and the test report(PDF file) is available

                      7.New alcohol cleaning structure

                       

                      Full Automatic Screen Printer YSL-510H 2                                         Full Automatic Screen Printer YSL-510H 3

                       

                      Precise Device of Platform Adjustment         Intelligent 2D examination

                      (X-Y-Z Adjust the system)

                       

                                         Full Automatic Screen Printer YSL-510H 4                                   Full Automatic Screen Printer YSL-510H 5     Full Automatic Screen Printer YSL-510H 6

                       

                      Mark Point Identification Technology               Stable Printing Quality

                       

                      Full Automatic Screen Printer YSL-510H 7      Full Automatic Screen Printer YSL-510H 8 Simple calibration and maintenance

                       

                      Full Automatic Screen Printer YSL-510H 9

                       

                      Precision Guarantee


                      Online Message
                      Welcome message, we will reply within 24 hours!
                      *Subject:
                      *Your E-Mail:
                      (Please make sure your E-mail address is correct.
                      Else, the receiver cannot reply you afterwards. )

                      Content:
                      *Country/Region:
                      Your Company:
                      Your Name:
                      Tel:
                      Fax:
                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                      CONTACT US
                      Contacts:Eva Liu +86 13416743702
                      Tel:+86-512-62751429
                      Skype:evaliuhuan
                      Email:sales@yushunli.com evaliu@hk-yush.com
                      Company Address:Address: Building H, GuoRui Pioneering
                      Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                      Suzhou,Jiangsu,China.
                      Postcode:215331
                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016