Parameters of Punch Plate Separator--YSPE
1. Punching die.
2. the equipment is compact, the fuselage is strong, and the cylinder is 125160200 cylinder diameter.
3. The equipment runs smoothly with low vibration and noise.
4. the Chinese touch-screen display, the panel is clear, the Chinese alarm function shows that the abnormal alarm is clear at a glance.
5. The equipment is universal. Various moulds can be replaced, and the change of moulds is convenient and fast.
1. Double switch two hands action start.
2. Equipments are equipped with the slideway of lower die in and out, and the lower die is automatically in and out, so the product is convenient and safe to take and place.
3. Set up emergency shutdown switch and shut down in time when problems are found.
4. Set up the safety door to avoid the wrong hand entry when installing and debugging the mould. (No safety door does not work during normal operation)
5. Set up a safety door shooting device, and place a wrong plate on the die. The shooting device can sense errors, and the die can not enter.
6. Safety air pressure setting function, alarm for exceeding limit. Automatic counting, over-limit shutdown.
7. Minimizing the internal stress and avoiding tin cracking
8. Punching semi-finished PCB. FPC efficiency is very high, the world's top 500 designated product suppliers.
Size: 820 *740 *1750mm
B. Punching force: 3T 8T 10T
C. Placement area 330 x 220 mm
D. Drying gas source with working pressure of 0.50-0.70 Mpa
E. Cylinder return opening force: 1.5T 4T 5T
F. Use voltage 220VAC
G. Travel speed: 8-15 seconds adjustable (excluding the time to take parts from the plate)
H. Working itinerary: > 60mm
I. Working noise:<60dB
J. Working accuracy: +0.05 mm
K. Machine weight 580 kg
Parameters of Punch Plate Separator--YSPE
1. Punching die.
2. the equipment is compact, the fuselage is strong, and the cylinder is 125160200 cylinder diameter.
3. The equipment runs smoothly with low vibration and noise.
4. the Chinese touch-screen display, the panel is clear, the Chinese alarm function shows that the abnormal alarm is clear at a glance.
5. The equipment is universal. Various moulds can be replaced, and the change of moulds is convenient and fast.
1. Double switch two hands action start.
2. Equipments are equipped with the slideway of lower die in and out, and the lower die is automatically in and out, so the product is convenient and safe to take and place.
3. Set up emergency shutdown switch and shut down in time when problems are found.
4. Set up the safety door to avoid the wrong hand entry when installing and debugging the mould. (No safety door does not work during normal operation)
5. Set up a safety door shooting device, and place a wrong plate on the die. The shooting device can sense errors, and the die can not enter.
6. Safety air pressure setting function, alarm for exceeding limit. Automatic counting, over-limit shutdown.
7. Minimizing the internal stress and avoiding tin cracking
8. Punching semi-finished PCB. FPC efficiency is very high, the world's top 500 designated product suppliers.
Size: 820 *740 *1750mm
B. Punching force: 3T 8T 10T
C. Placement area 330 x 220 mm
D. Drying gas source with working pressure of 0.50-0.70 Mpa
E. Cylinder return opening force: 1.5T 4T 5T
F. Use voltage 220VAC
G. Travel speed: 8-15 seconds adjustable (excluding the time to take parts from the plate)
H. Working itinerary: > 60mm
I. Working noise:<60dB
J. Working accuracy: +0.05 mm
K. Machine weight 580 kg
