One meter lamp bar splitter Shunli LED lamp bar splitter is favored by many LED customers instead of hand splitter splitter splitter splitter
YSVC-3S Specification
1. Model YSVC-3S with 2.4M platform
2. Size 880 * 420 * 320 mm (L * W * H)
3. Voltage 220 V/50 HZ or 110 V
4. The minimum component distance of V-groove is 1 mm.
5. machine weight 52kg
6. Maximum assembly height 20 mm
7. Cutting thickness 0.6-5.0 mm
8. Cutting speed 300 ~ 500mm / S
9. Suitable PCB length is unlimited
Product characteristics:
1. Using a unique cutting method, the circuit board is cut by six blades. It consists of an upper blade and a lower blade, and is also a cutting unit.
2. Because of many times of cutting, the cutting process is very smooth, which greatly improves the position ability of V-CUT slot. Even if there are shallow V-CUT grooves, the plate will not jump out of the blade to avoid disadvantage.
3. Because the cutting force of the blade is very small. Abd is made of high-speed steel imported from Sweden. The durability of the blade is greatly improved, and the service life of cutting aluminium sheet can be one year or longer.
4. There are three groups A, B and C. The whole cutting process is divided into three stages, from group A blade cutting 40% plate to group B blade cutting through group A slotting to complete another 40%. The final 20% cutting C group blades and finishing. Because each cutting volume is very small, the stress generated in the cutting process is reduced by more than 80% compared with the traditional cutting.
5. All cutting blades are calibrated by excitation dual-frequency laser interferometer. Make sure that the rear knife can continue to cut into the groove that has been cut with the front knife accurately. The jitter of the tool tip is less than 0.02mm. Ensure perfect cutting quality.
One meter lamp bar splitter Shunli LED lamp bar splitter is favored by many LED customers instead of hand splitter splitter splitter splitter
YSVC-3S Specification
1. Model YSVC-3S with 2.4M platform
2. Size 880 * 420 * 320 mm (L * W * H)
3. Voltage 220 V/50 HZ or 110 V
4. The minimum component distance of V-groove is 1 mm.
5. machine weight 52kg
6. Maximum assembly height 20 mm
7. Cutting thickness 0.6-5.0 mm
8. Cutting speed 300 ~ 500mm / S
9. Suitable PCB length is unlimited
Product characteristics:
1. Using a unique cutting method, the circuit board is cut by six blades. It consists of an upper blade and a lower blade, and is also a cutting unit.
2. Because of many times of cutting, the cutting process is very smooth, which greatly improves the position ability of V-CUT slot. Even if there are shallow V-CUT grooves, the plate will not jump out of the blade to avoid disadvantage.
3. Because the cutting force of the blade is very small. Abd is made of high-speed steel imported from Sweden. The durability of the blade is greatly improved, and the service life of cutting aluminium sheet can be one year or longer.
4. There are three groups A, B and C. The whole cutting process is divided into three stages, from group A blade cutting 40% plate to group B blade cutting through group A slotting to complete another 40%. The final 20% cutting C group blades and finishing. Because each cutting volume is very small, the stress generated in the cutting process is reduced by more than 80% compared with the traditional cutting.
5. All cutting blades are calibrated by excitation dual-frequency laser interferometer. Make sure that the rear knife can continue to cut into the groove that has been cut with the front knife accurately. The jitter of the tool tip is less than 0.02mm. Ensure perfect cutting quality.
