Model YSVJ-650
Total size L2160 * W 850 * H1050mm
Power 230V
Inlet conveying length 850 mm
Vacuum cleaner
Outlet conveying length 850 mm
The number of separated blades is 20 groups of upper and lower blades, totaling 40 blades.
Maximum cutting length: unlimited
PCB thickness 0.6-5.0 mm
Primary Separation of PCB Number 11 LINES
The separation width of a single PCB is 8-20MM
Maximum PCB width 240 mm or 300 mm
Maximum component height 30 mm
Blade material SKD61
Average blade life is 1,000,000 times (1.2 m long, 3 mm thick PCB)
Voltage 220V/50Hz or 110V
It weighs 210 kg.
Spacer spacing of blades
Power 230V
Vacuum cleaner
|
Feature: 1. The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place, 2.. This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.
3. Multi-blade Depaneling/YSVJ-650 Multi-blade Depaneling Machine,All the v-cut pcb board can be cut by this machine, 4. Using the machine to cut, reduce stress, prevent the solder joint cracking,Blade is made of SKH51 high speed steel PCB Depaneling machine
5. Pcb board is cut by multiple cutters which can cut several board once,pick and place PCB Depaneling machine
6. The machine top cutter wheel can be slightly adjust:0-5mm,aluminum board PCB Depaneling machine-YSVJ-650.
7. speed can be set PCB Depaneling machine,The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.
8. Blade is made of SKH51 high speed steel with long service life and wear resistance.
9. Cutting speed can be set and conveniently adjusted by turn-knob,PCB cutting machine for SMT Production line -YSVJ-650
10. Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.
11. With several knives, the machine operates simply and efficiently and is suitable for mass production.
Specification
|
Model YSVJ-650
Total size L2160 * W 850 * H1050mm
Power 230V
Inlet conveying length 850 mm
Vacuum cleaner
Outlet conveying length 850 mm
The number of separated blades is 20 groups of upper and lower blades, totaling 40 blades.
Maximum cutting length: unlimited
PCB thickness 0.6-5.0 mm
Primary Separation of PCB Number 11 LINES
The separation width of a single PCB is 8-20MM
Maximum PCB width 240 mm or 300 mm
Maximum component height 30 mm
Blade material SKD61
Average blade life is 1,000,000 times (1.2 m long, 3 mm thick PCB)
Voltage 220V/50Hz or 110V
It weighs 210 kg.
Spacer spacing of blades
Power 230V
Vacuum cleaner
|
Feature: 1. The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place, 2.. This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.
3. Multi-blade Depaneling/YSVJ-650 Multi-blade Depaneling Machine,All the v-cut pcb board can be cut by this machine, 4. Using the machine to cut, reduce stress, prevent the solder joint cracking,Blade is made of SKH51 high speed steel PCB Depaneling machine
5. Pcb board is cut by multiple cutters which can cut several board once,pick and place PCB Depaneling machine
6. The machine top cutter wheel can be slightly adjust:0-5mm,aluminum board PCB Depaneling machine-YSVJ-650.
7. speed can be set PCB Depaneling machine,The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.
8. Blade is made of SKH51 high speed steel with long service life and wear resistance.
9. Cutting speed can be set and conveniently adjusted by turn-knob,PCB cutting machine for SMT Production line -YSVJ-650
10. Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.
11. With several knives, the machine operates simply and efficiently and is suitable for mass production.
Specification
|
